FTM Board Club
NXP Semiconductors
Development Board for LPC11U68

The LPC11U68 Development Board is designed to enable rapid evaluation and prototyping with NXP's LPC11U68 Cortex-M0+ microcontroller.

The rich set offeatures of this boardmake it a great starting point for your next Cortex-M0+ project. The LPC11U68 Development Board is compatible with LPCXpresso development tools from NXP, and the LPC-Link2 or any LPCXpresso V2 board can be used as a debug probe. The board can also be used with KEIL MDK

The LPC11U68 Development Board includes a standard 10-pin JTAG/SWD connector for connection to LPC-Link2 or other supported JTAG probes. The board comes pre-programmed with six example programs which demonstrate several capabilities of the board, with source code provided. All signals from the LPC11U68 device are routed to 0.1” pitch pads on the board to allow easy access to signals.

Drivers, middleware and example code for the LPC11U68 Development Board are available free of charge from NXP as part of the LPCOpen library.

Demo Box Contents:

  • LPC11U68 Development Board
  • USB cable
  • 9-pin, female to female serial cable
  • Documentation CDROM
  • Visualization using 240 x 320 TFT color LCD and 3 GPIO-controlled LEDs
  • IC controlled temperature sensor
  • On-board SPI FLASH to save application data
  • 2 x USARTs with RS232 transceivers
  • ADC converter with adjustable potentiometer
  • 2 x external interrupt keys, 1 x reset key, 1 x joystick key
  • 1 x PWM speaker
  • 1 x ISO7816-3 standard compliant SMART CARD reader
  • Powered by USB or external 5.5 V adaptor (not supplied)