FTM Board Club
NXP Semiconductors
OM13073
LPCXpresso43S37 board

The LPCXpresso family of boards provides a powerful and flexible development system for NXP's Cortex-M MCUs.

The LPCXpresso43S37 board has been developed by NXP to enable evaluation of and prototyping with the LPC4300 family of MCUs, and features the LPC43S37 in its 100 PIN BGA package option.

LPCXpresso™ is a low-cost development platform, available from NXP supporting NXP's ARM-based microcontrollers. The platform is comprised of a simplified Eclipse-based IDE and low-cost target boards which include an attached SWD debugger. LPCXpresso is an end-to-end solution enabling embedded engineers to develop their applications from initial evaluation to final production.

LPCXpresso IDE supports programming and debugging LPCXpresso boards using the on-board CMSIS-DAP debug interface, or with an external debug probe such as LPC-Link2. LPCXpresso43S37 is ready for use with the LPCXpresso IDE. An external debug probe can be used by simply connecting it to the board via the P1 connector and powering the board via the J3 USB connection.

Features
  • LPC43S37 dual-core (M4F and M0+) MCU running at up to 208 MHz
  • On-board high-speed USB based debug probe with CMSIS-DAP and LPCXpresso IDE Redlink protocol options, can debug the on-board LPC43S37 or external target
  • Support for external debug probes
  • Tri-color LED
  • Target Reset, ISP and WAKE buttons
  • Expansion options based on Arduino UNO R3 and Pmod™, plus additional expansion port pins
  • On-board Ethernet PHY (output available at expansion connectors)
  • High speed USB A/B connector for host or slave operation
  • 8 Mb Macronix quad SPI flash
  • UART, IC and SPI port bridging from LPC43S37 target to USB via the on-board debug probe
  • FTDI UART connector
  • A7001CM secure element