FTM Board Club
Cypress Semiconductor
Development and Evaluation based on the EZ-BLE PSoC Module

The CYBLE-224110-EVAL EZ-BLE PSoC Evaluation Board enables you to evaluate and develop applications with the CYBLE-224110-00 EZ-BLE PSoC XT/XR Module.

The CYBLE-224110-EVAL board can be used with the Bluetooth Low Energy Pioneer Kit (CY8CKIT-042-BLE) and PSoC Creator to develop BLE applications.

To enable easy prototyping the evaluation board routes the GPIOs of the on-board EZ-BLE PSoC XT/XR Module to the CapSense slider, RGB LED, switches, PSoC 5 LP and FRAM on the BLE Pioneer Baseboard.



The Cypress CYBLE-224110-00 is a fully certified and qualified module supporting Bluetooth® Low Energy (BLE) wireless communication. The CYBLE-224110-00 is a turnkey solution that includes onboard power amplifier (PA), low noise amplifier (LNA), crystal oscillators, chip antenna, passive components, and the Cypress PSoC® 4 BLE.

The EZ-BLE™ PSoC® XT/XR module provides extended industrial temperature operation (XT) as well as extended communication range (XR). The EZ-BLE™ XT/XR module is a scalable and reconfigurable platform architecture, combining programmable and reconfigurable analog and digital blocks with flexible automatic routing. The CYBLE-224110-00 also includes digital programmable logic, high-performance analog-to-digital conversion (ADC), opamps with comparator mode, and standard communication and timing peripherals.

The CYBLE-224110-00 includes a royalty-free BLE stack compatible with Bluetooth 4.1 and provides up to 25 GPIOs in a small 9.5 × 15.4 × 1.80 mm footprint.  The CYBLE-214009-00 is a complete solution and an ideal fit for applications seeking a highly integrated BLE wireless solution.


Module Description

  •  Module size: 9.5 mm × 15.4 mm × 1.80 mm (with shield)
  •  Extended Range: Up to 400 meters line-of-sight
  •  Extended industrial temperature range: –40 °C to +105 °C
  •  Up to 25 GPIOs
  •  256-KB flash memory, 32-KB SRAM memory
  •  Bluetooth 4.1 qualified single-mode module
  •  Certified to FCC, CE, MIC, KC, and IC regulations
  •  32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
  •  Programmable analog
    • 4 x Opamps
    • 1 x 12-bit, 1-Msps SAR ADC
    • 1 x Low-Power Comparators
  •  1 x Cypress CapSense™ touch controller with SmartSense™ Auto-Tuning
  •  Programmable digital
    • 4 x universal digital blocks
    • 4 x 16-bit configurable Timer/Counter/PWM blocks
    • 2 x configurable serial communication blocks
  • Watchdog timer with dedicated internal low-speed oscillator (ILO)
  • Two-pin SWD for Programming
  • Certified to FCC, CE, MIC, KC, and IC regulations. Refer to KBA97094 for RF certification test reports.
  • Bluetooth SIG 4.1 qualified
  • CYBLE-224110-EVAL EZ-BLE™ PSoC® Evaluation Board to evaluate and develop applications on the EZ-BLE™ PSoC® Module